Using Voice-Activated Dialing - Sanyo SCP-3200 User Manual

Using Voice-Activated Dialing

In addition to Sprint Voice Command (see page 239), you can
use a voice dial tag to automatically dial a phone number in
your Contacts. (A voice dial tag is a command you record and
use to place calls without using the keypad.) Your phone can
store up to 30 voice dial tags.
Note: Please set the Voice Prompt feature (see page 53) to on
before using the Voice-Activated Dialing so that you can
hear the voice instruction from the phone. The default
setting is off.
Making a Call Using Voice-Activated Dialing
With the phone open:
1.
Press and hold
2.
Follow the system prompts and recite the entry's Voice
Dial tag into your phone's microphone.
With the phone closed:
1.
Press and hold
2.
Follow the system prompts and recite the entry's Voice
Dial tag into your phone's microphone.
Note: To use the Voice Dial function, you must have a stored entry
for Voice Dial . (See "Programming Voice Dial Tags" on
page 133.)
132 Section 2H: Using Your Phone's Voice Services
.
.