Sanyo SCP-3200 User Manual page 58

3.
Select the name you want to call from the list, and then
press
Note:
When Ph.Book Match is set to Enable and a number is saved in
Contacts (regardless of whether Prepend is enabled or
disabled), you can display the number by entering its last
three to six digits.
To place a call using Prepend Abbreviated Dialing:
1.
Enter the last four or five digits of the number.
2.
Press
Note:
When Prepend is set to Enable and Ph.Book Match is set to
Disable, you can display the 10-digit number (including the
predefined prepend number) by entering the last four or five
digits of the number.
The Prepend feature is available when all of following
conditions are met:
· Prepend is set to Enable.
· A prepend number has been predefined.
·The combined total (prepend number plus the digits you
enter) is 10 digits.
When both Ph.Book Match and Prepend are set to Enable and
a number is not saved in Contacts, you can display the 10-digit
number (including the five- or six-digit prepend number) by
entering the last four or five digits of the number.
Tip: You can also place a call by pressing Options (right softkey) >
Abbrev. Dial after step 1 above for either Ph.Book Match
Abbreviated Dialing or Prepend Abbreviated Dialing.
42 Section 2A: Phone Basics
to place a call.
.