Using Abbreviated Dialing - Sanyo SCP-7050 User Manual

Using Abbreviated Dialing

Abbreviated Dialing is similar to speed dialing. You can use
either of the following abbreviated dialing features.
Ph. Book Match to retrieve any desired number saved in your
Contacts by entering only the last three to six digits of the
number. This feature becomes available when you enable
Abbreviated Dialing feature. (See "Setting Abbreviated
Dialing" on page 47.)
Prepend to predefine the first five- or six-digit prefix you wish
to use for abbreviated dialing, so that you can dial a number by
entering only the last four or five digits of the number. This
feature becomes available when you enable Abbreviated
Dialing feature. (See "Setting Abbreviated Dialing" on
page 47.)
To place a call using Ph. Book Match abbreviated dialing:
1. Enter the last 3-6 digits of a Contacts entry's phone number
saved in your Contacts.
2. Press
To place a call using Prepend abbreviated dialing:
1. Enter the last four or five digits of your desired number.
2. Press
Note:
If the digits match more than one entry, the Abbrev. Dial list will
be displayed; select the correct entry and press
When
Disable
predefined prepend number) by entering the last four or five digits
of the number.
When both
your desired number is not saved in
the 10-digit number (including the five- or six-digit prepend
number) by entering the last four or five digits of the number.
Tip:
You can also place a call by pressing
Abbrev. Dial
select
24
or .
or .
Prepend
is set to
, you can display the 10-digit number (including the
Ph. Book Match
after step 1 above.
Enable Ph. Book Match
and
Prepend
and
Contacts
Options
again.
is set to
Enable
are set to
, you can display
(right softkey) and
and