Receiving A 10-4 Call - Sanyo SCP-7050 User Manual

Receiving a 10-4 Call

1. Make sure your phone's 10-4 mode is enabled (see "Setting
10-4 Mode" on page 89).
2. When you receive a 10-4 call from a Contacts entry, "10-4
Call," the entry's name, and the 10-4 number appear on the
display.
When you receive a group call, "Group Call", group
member's name, and the 10-4 number appear.
3. If the person placing the call has kept the floor (held the
you will see the entry name and 10-4 number along with
"has floor.," and you will hear the caller speaking.
4. When the caller finishes speaking and releases
see "Floor is open." on the display screen. Press and hold
to take the floor and reply to the caller. (You will see
"You have floor." and hear a tone confirming that you may
speak.)
5. When the conversation is finished, press
Tip:
You can also receive a 10-4 call with the phone closed. Press and
hold to take the floor when the floor is open.
Note:
You can change the volume and the speaker setting while a 10-4
call is activated.
pressing the navigation key up or down (except when you are pressing
and holding
pressing
94
Volume:
Adjust the voice volume by using
Speaker:
). Switch the speaker on or off by
.
),
, you will
.
or by