Integrator's Reference Manual for Polycom HDX Systems
ipaddress
4 - 126
Sets or gets the LAN IP address of the system.
Syntax
ipaddress get
ipaddress set "xxx.xxx.xxx.xxx"
Parameter
get
set
"xxx.xxx.xxx.xxx"
Feedback Examples
ipaddress 192.168.1.111
restart system for changes to take effect. restart now? <y,n>
Comments
Use this command when you need to allocate a static IP address to your
system. After making a change, you are prompted to restart the system.
Description
Returns the current setting.
Sets the LAN IP address to the "xxx.xxx.xxx.xxx"
parameter. This setting can only be changed when
DHCP is off.
IP address of the system.