Sanyo HT27547 Owner's Manual page 36

MENU OPTION— CH (CHANNEL) SCAN MEMORY
ADDING DIGITAL OR ANALOG
CHANNELS TO MEMORY
Channel Scan Memory is a list of active channels that
you can scan through using the Channel Scan CH L
(up) CH M (down) keys. This list can be customized by
deleting and/or adding channels.
1
Press the MENU key to display the Main menu.
Use the CURSOR LM keys to highlight CH Scan
2
Memory. Press ENTER.
OPERATING TIP:
I
If one digital sub-channel is added back to the
Channel Scan Memory list, all of that channel's
sub-channels will be added back.
HELPFUL HINTS (PROBLEMS/SOLUTIONS)
SYMPTOM
Cannot select or scan some
channels.
If you continue to experience problems, please call toll free
CHECK THESE CONDITIONS
Channels may be removed from
G
memory.
Check antenna connections.
G
NO digital signal being broadcast.
G
G Weak Signal.
V-Guide is set to block program-
G
ming.
1-800-877-5032.
3
Use the numerical 0 ~ 9 keys to select desired
channel. "Add?" will appear beside the channel
number. HINT: Press the TUNER key to switch
between Digital and Analog Channel Scan memo-
ries.
4
Press the ENTER key to add the channel. The
display will change to "added."
After 3 seconds the TV screen will display "Delete?"
TRY THESE SOLUTIONS
Select Channel Scan memory and
G
manually add channels or start an
"All Channel Search."
Turn antenna, install signal
G
booster.
G Set V-Guide to "Off" or press
RESET key to clear all settings and
restart channel search.
We can Help!
36