Sanyo HT27547 Owner's Manual page 35

MENU OPTION— CH (CHANNEL) SCAN MEMORY
DELETING ANALOG OR DIGITAL
CHANNELS FROM MEMORY
Channel Scan Memory is a list of active channels that
you can scan through using the Channel Scan CH L (up)
CH M (down) keys. This list can be customized by delet-
ing and/or adding channels.
1
Press the MENU key to display the Main menu.
Use the CURSOR LM keys to highlight CH Scan
2
Memory. Use the CURSOR
channel number area.
OPERATING TIPS:
I
When a digital channel is deleted, all of that
channel's sub-channels are deleted as well.
I
Only previously deleted digital channels can be
added back to the Channel Scan Memory.
HELPFUL HINTS (PROBLEMS/SOLUTIONS)
SYMPTOM
Cannot select or scan some
channels.
If you continue to experience problems, please call toll free
>
key to select the
CHECK THESE CONDITIONS
Channels may be removed from
G
memory.
Check antenna connections.
G
NO digital signal being broadcast.
G
G Weak Signal.
V-Guide is set to block
G
programming.
1-800-877-5032.
Use the CHANNEL (CH LM) keys or numerical
3
0 ~ 9 keys to select desired channel. HINT: Press
the TUNER key to switch between Digital and
Analog Channel Scan memories.
4
Press the ENTER key to delete the channel. The
display will change to "deleted."
After 3 seconds the TV screen will display "Add?"
TRY THESE SOLUTIONS
Select Channel Scan memory and
G
manually add channels or start an
"All Channel Search."
Turn antenna, install signal
G
booster.
G Set V-Guide to "Off" or press
RESET key to clear all settings and
restart channel search.
We can Help!
35