Sanyo HT27547 Owner's Manual page 19

VIDEO2 COMPOSITE (ANALOG) JACKS: Connection Option 2
CONNECTING ANALOG CABLE, VCR, AND AN ANTENNA TO THE DTV
Connect Analog Cable system to the VCR
1
"Antenna In."
2 Connect the VCR AV out jacks to VIDEO2 Yellow,
White, and Red jacks.
3 Press INPUT to select Video 2 to watch Analog
Cable channels OR to TV channels to watch
Antenna channels.
„
INPUT
REMOTE CONTROL
OPERATING TIP:
Refer to the owner's manuals and
user's guides that came with your
external equipment for connection
options.
HELPFUL HINTS (PROBLEMS/SOLUTIONS)
SYMPTOM
"No Signal" will appear randomly
on the screen when no signal is
detected at the video jack.
DTV VIDEO2
CABLE SYSTEM
(Service provider)
‚
CHECK THESE CONDITIONS
Check Audio / Video connections.
G
Check external equipment
G
connections.
Check external equipment
G
setting.
If you continue to experience problems, please call toll free
1-800-877-5032.
Select channels with the VCR's remote control.
4
Select Antenna channels with the DTV remote
control.
IMPORTANT FACTS:
Composite jacks offer only 480i (SDTV ) resolution.
YELLOW,
WHITE, & RED,
JACKS
ƒ
TRY THESE SOLUTIONS
Press the INPUT key.
G
Switch on external equipment.
G
Set external equipment output
G
connections to match input
connections.
We can Help!
VCR
19