Sanyo HT27547 Owner's Manual page 18

VIDEO2 COMPOSITE (ANALOG) JACKS: Connection Option 1
CONNECTING ANALOG CABLE, CABLE BOX, VCR, AND AN ANTENNA TO
THE DTV
1 Connect Analog Cable Box "Antenna Out" to the
VCR "Antenna In."
Connect the VCR AV out jacks to VIDEO1 Yellow,
2
White, and Red jacks.
OPTIONAL FOR A SUPER VHS VCR
3 3
Connect VCR to the DTV S-Video In Jack. Discon-
nect the VIDEO2 yellow connector
Tune VCR to channel 3 or 4 to match your Cable
4
Box.
†
INPUT
REMOTE CONTROL
OPERATING TIP:
Refer to the owner's manuals and user's
guides that came with your external equip-
ment for connection options.
HELPFUL HINTS (PROBLEMS/SOLUTIONS)
SYMPTOM
"No Signal" will appear randomly
on the screen when no signal is
detected at the video jack.
VCR
CABLE SYSTEM
(Service provider)
CABLE BOX
CHECK THESE CONDITIONS
Check Audio / Video connections.
G
Check external equipment
G
connections.
Check external equipment
G
setting.
If you continue to experience problems, please call toll free
1-800-877-5032.
Press INPUT to select Video 2 to watch Analog
5
Cable channels OR to TV channels to watch
Antenna channels.
Select Cable channels with the cable box remote
6
control. Select Antenna channels with the DTV
remote control.
IMPORTANT FACTS: Composite jacks offer only 480i
(SDTV) resolution.
ƒ
‚
TRY THESE SOLUTIONS
Press the INPUT key.
G
Switch on external equipment.
G
Set external equipment output
G
connections to match input
connections.
We can Help!
DTV VIDEO2
S-VIDEO JACK
(Optional)
z
YELLOW,
WHITE, & RED
JACKS
VCR
18