APPLICATIONS
The LIQUID-SENSOR Controller and LIQUID-PAD Detector can be used
with a wide variety of different pump systems for leak detection. The alarm
controller has two inputs. These can both be used with LIQUID-PAD
Detectors, or one input can be used with a LIQUID-PAD Detector and the
second input used with other type detectors such as a liquid level detector for
determining high or low levels in a container. Figures 1 through 5 show
various suggested detector arrangements in different pump systems. Tubing
is omitted for clarity.
Figure 1. Typical B/T
®
RAPID-LOAD
®
Pump with LIQUID-PAD Detector
positioned under open side of pump
3