Introduction; Before Using The Product For The First Time - Martin RUSH CS Series User Manual

Introduction

The RUSH® CS Series from Martin® is a line of rugged LED-based lighting fixtures with a remote power
supply unit. Fixtures are available in 300 mm (1 ft.), 600 mm (2 ft.), 900 mm (3 ft.) and 1200 mm (4 ft.)
length models, each with either wide or graze optics. Wide optic models are designed for a range of
indirect lighting applications. Graze models are designed for illumination of walls or other surfaces and
have an asymmetric 18° x 65° beam-angle.
The fixtures are powered by a remote power supply unit (PSU) which is controlled by DMX and configured
using RDM (Remote Device Management). Multiple fixtures can be linked together making for simple
installation of long runs. Each PSU can power up to 10 meters (32 ft.) of LED fixtures.
The RUSH® CS Series system features:
•
Long-life, high output Cree LEDs
•
Remote 100-240 V, 50/60 Hz auto-ranging AC power supply
•
Low voltage 36V supply to fixtures
•
Easy wiring with integral combined low voltage power and data cables
Each fixture is supplied with two hinged mounting brackets.

Before using the product for the first time

1. Read 'Safety information' on page 5 before installing, operating or servicing the fixture.
2. Unpack and ensure that there is no transportation damage before using the fixture. Do not attempt to
operate a damaged fixture.
3. Before operating, ensure that the voltage and frequency of the power supply match the power
requirements of the fixture.
4. If fixtures are exposed to a sudden temperature change, give them time to warm or cool to the
ambient temperature before applying power. This will help avoid damage due to condensation.
5. Check the support pages on the Martin® website at www.martin.com for the most recent user
documentation and technical information about the fixture. Martin® user manual revisions are
identified by the revision letter at the bottom of the inside cover.
8
RUSH® CS Series User Manual