Table of Contents
Advertisement
Physical installation
Warning! Read 'Safety information' on page 5 before installing the fixture.
Warning! The safety and suitability of lifting equipment, installation location, anchoring
method, mounting hardware and electrical installation are the responsibility of the installer.
All local safety regulations and legal requirements must be observed when installing and
connecting the RUSH® CS Series. Installation must be carried out by qualified
professionals only.
Contact your Martin supplier for assistance if you have any questions about how to install this product
safely.
Fixture location
RUSH® CS Series fixtures are intended for interior use only. Do not install outside or in damp or humid
locations. The fixtures and Power Supply Unit require free and unobstructed airflow around them to ensure
adequate cooling.
Observe the following limitations in selecting a location:
•
Respect the limitations listed under Safety information' on page 5.
•
Do not locate the fixture in an unventilated space.
Mounting the fixture
Warning! All fasteners used to mount RUSH® CS Series fixtures must
be strong enough to mount the fixture safely. Install a washer directly
under the head of each fastener when anchoring the mounting bracket
to the installation surface.
Positioning the mounting brackets
The fixture's mounting brackets must be securely anchored
to a suitable support. The mounting surface must be hard,
fixed and flat. For bracket dimensions see illustration on
right.
The fixture can be mounted at any angle. The mounting
brackets allow the fixture to be manually tilted 90° either side
of central position for beam aiming adjustment.
Fasten the fixture securely with suitable mechanical
fasteners. Do not stand it on a surface or leave it where it
can be moved or fall over. Ensure that the surface and all
fasteners used can support at least 10 times the weight of all
fixtures and equipment they will support.
RUSH® CS Series User Manual
M6
11
Advertisement
Table of Contents
