Safety Information - Martin RUSH CS Series User Manual

Safety information

Read the safety precautions in this manual before installing, operating or servicing
The following symbols are used to identify important safety information on the product and in this manual:
Warning! Warning!
Safety hazard. Powerful light
Risk of severe emission. Risk
injury or of eye injury.
death.
Warning! Risk Group 2 product according to EN 62471. Do not look directly into the beam.
Do not view the light output with optical instruments or any device that may concentrate
the beam.
This lighting fixture is for professional use only and must be installed by a qualified
technician. It is not for household use. It presents risks of severe injury or death due to fire
hazards, electric shock and falls. It can create a fire hazard or a risk of eye injury if the
safety precautions below are not followed.
Install, operate and service RUSH® by Martin® products only as directed in their user
manuals, or you may create a safety hazard or cause damage that is not covered by
product warranties. Follow the safety precautions listed below and observe all warnings in
this manual and printed on the product. Keep this user manual for future use.
For the latest user documentation and other information about this and all Martin®
products, please visit the Martin® website at http://www.martin.com
If you have any questions about how to install, operate or service the fixture safely, please
contact your Martin® distributor (see www.martin.com/distributors for details) or call the
Martin® 24-hour service hotline on +45 8740 0000, or in the USA on 1-888-tech-180.
Respect all locally applicable laws, codes and regulations when installing, operating or
servicing the fixture.
Protection from electric shock
Ensure that the fixture is electrically connected to ground (earth).
Disconnect the fixture from AC power when not in use.
Never connect or disconnect a live Power + Data Cable. Shut down power to the fixtures
before connecting or disconnecting cables.
Do not open the fixture or remove any cover. Refer any service operation not described in
this manual to an authorized Martin Service partner.
Shut down power to the entire installation at the main power distribution board and lock out
power before carrying out any installation or maintenance work.
Use only a source of AC power that complies with local building and electrical codes and
has both overload and ground-fault (earth-fault) protection.
Isolate the fixture from power immediately if any seal, cover, cable, or other component is
damaged, defective, deformed or showing signs of overheating. Do not reapply power until
repairs have been completed
WARNING!
this product.
Warning! Warning!
See user Hazardous
manual for voltage. Risk
important of lethal or
safety severe electric
information. shock.
RUSH® CS Series User Manual
Warning! Warning!
Fire hazard. Hot surfaces.
5