Service Overview; Troubleshooting; Periodic Inspection And Maintenance; Periodic Inspection - Sony MVS-6530 Installation Manual

2-1. Troubleshooting

Power of MVS-6520/6530/3000 does not turn on
(LED is not lit in green.)
Power of MVS-6520/6530/
3000 does not turn on.
(LED is not lit in green.)
Is the power switch (A/B) of
MVS-6520/6530/3000
turned on?
YES
Is the power cord of
MVS-6520/6530/3000
connected correctly?
YES
The possible cause is power
unit failure.

2-2. Periodic Inspection and Maintenance

2-2-1. Periodic Inspection

The following parts require periodic maintenance.
Refer to the period indicated in the following list for maintenance.
Common in MVS-6520/6530/3000
Part Where used
Fan Side on the rear of the
MVS-6520/6530/3000
Filter Front panel
Power supply unit
MVS-6520
Section 2

Service Overview

NO Turn on the power switch
(A/B).
NO
Connect the power cord
correctly.
Monitor image is not output correctly
Power of MVS-6520/6530/
3000 is turned on, but the
image is not output to the
monitor correctly.
Is the standard board
inserted into the specified
slot correctly?
YES
Is the optional board
inserted into the specified
slot correctly?
YES
Is the input/output cable
connected correctly?
YES
Is the software installed
correctly?
YES
The possible cause is the
failure of MVS-6520/6530/
3000.
Maintenance Suggested period
Cleaning Once in a month
Replacement Once in about four years
Cleaning Once in two months
Replacement Once in about four and
a half years
Insert the standard board into
NO
the specified slot correctly.
(Refer to the MVS-6520/6530/
3000 Maintenance Manual.)
Insert the optional board into
NO
the specified slot correctly.
(Refer to Section 1-4.)
Check the connection of the
NO
input/output device.
Perform the installation of
NO
software.
(Refer to the User's Guide.)
2-1 (E)