Sony MVS-6530 Installation Manual page 27

LED
D203 (C-1): +12V
+12V power status indication.
Lit when +12V is supplied.
D302 (C-1): +3.3V
+3.3V power status indication.
Lit when +3.3V is supplied.
D304 (C-1): +2.5V
+2.5V power status indication.
Lit when +2.5V is supplied.
D305 (D-1): +1.8V
+1.8V power status indication.
Lit when +1.8V is supplied.
D301 (D-1): +1.2V
+1.2V power status indication.
Lit when +1.2V is supplied.
D306 (D-1): +1.0V
+1.0V power status indication.
Lit when +1.0V is supplied.
D307 (D-1): +0.9V
+0.9V power status indication.
Lit when +0.9V is supplied.
D303 (E-1): REG
Status indication of +1.1V and +1.5V regulator.
Lit when the power is supplied from +1.1V and +1.5V
regulator.
D601 (E-1): CAD
CPLD configuration error indication.
When this LED is lit, CPLD (IC1) may not operate nor-
mally.
D1102 (E-1): AINTP
FPGA configuration error indication.
When this LED is lit, FPGA (IC3) may not operate nor-
mally.
MVS-6520
D1101 (E-1): PVFLT
FPGA configuration error indication.
When this LED is lit, FPGA (IC2) may not operate nor-
mally.
D909 (D-2): PPC_RST
Power PC reset indication.
Lit when Power PC is in reset state.
D901 to D908 (H-1): STATUS
Power PC status indication.
1-23 (E)