Using The 12-Hour On And Off Timer - Sanyo CH0951 Technical & Service Manual

1. TIMER ON mode
(Example)
ON
H
ON
1HR.
TIMER TEMP.
OFF
FLAP FAN SPEED MODE
ON OFF
NIGHT
CANCEL SETBACK
SET
ACL
BATTERIES
2. TIMER OFF mode
(Example)
OFF
H
ON
1HR.
TIMER TEMP.
OFF
FLAP FAN SPEED MODE
ON OFF
NIGHT
SET CANCEL SETBACK
ACL
BATTERIES
OI-202-21EG
Using the 12-Hour ON and OFF
Timer
After the length of time set for TIMER ON elapses, the unit begins
operating.
The display depicted at left indicates that the air conditioner will begin
operating in three hours.
Setting procedure:
STEP 1 Press the MODE selector button and select the desired
operation mode.
(See "Operation with the Remote Control Unit," page 14.)
STEP 2 Press the TIMER ON button.
(For example, to set the timer to turn on the air
conditioner after three hours have elapsed, press the
TIMER ON button three times.)
The time can be set to from one to twelve hours, in one
hour steps.
STEP 3 Press the SET button.
•
The display changes immediately to its status previous to timer setting,
but the indication remains.
ON
•
To check the status of the timer while it is counting down, press the SET
button.
Cancellation procedure: Press the CANCEL button.
After the length of time set for TIMER OFF elapses, the unit stops
operating.
The display depicted at left indicates that the air conditioner will stop
operating in five hours.
Setting procedure:
STEP 1 Press the TIMER OFF button.
(For example, to set the timer to turn off the air
conditioner after five hours have elapsed, press the TIMER
OFF button five times.)
The time can be set to from one to twelve hours, in one
hour steps.
STEP 2 Press the SET button.
•
The display changes immediately to its status previous to timer setting,
but the indication remains.
OFF
•
To check the status of the timer while it is counting down, press the SET
button.
Cancellation procedure: Press the CANCEL button.
1 2 3.......12
1 2 3.......12
19