Manual Operation - Sanyo CH0951 Technical & Service Manual

2. Manual Operation

NOTE
14
Operation with the Remote Control Unit (continued)
TIMER
STEP 2
STEP 4
STEP 5
Check that the circuit breaker on the power panel is turned on and that the
operation selector of the indoor unit is in the ON position.
If the automatic operation settings of the unit do not meet your needs,
press the setting buttons as described below and change the settings as
desired.
STEP 1 Press the MODE selector button and select the
desired mode.
For heating operation
For dehumidifying operation
For cooling operation
STEP 2 To start the air conditioner, press the ON/OFF
operation button.
STEP 3 Press the TEMP. setting buttons to change the
temperature setting to the desired temperature.
Adjustable temperature range:
88 F max. 60 F min.
STEP 4 Set the FAN SPEED selector button to the setting you
want.
If the fan speed is set to
NOTE
speed
difference between the actual room temperature and
the temperature setting.
STEP 5 Press the FLAP button and set the airflow direction as
desired.
(Refer to
page 21.)
To stop the air conditioner, press the ON/OFF operation button again.
SET TEMP.
ON
1HR.
OFF TEMP.
FLAP FAN SPEED MODE
ON OFF
NIGHT
SETBACK
SET CANCEL
switches automatically,
"Adjusting the Airflow Direction" on
STEP 3
STEP 1
(Automatic), the fan
according to the
OI-202-16EG