Canon imageFORMULA CR-L1 User Manual page 26

C
Set the [Page Size] in the [Basic] tab to [Auto detection] when
scanning in the Long Document mode.
D
Then, set the [Long Document mode] value in the [Others] tab.
You can scan documents up to 2,000 mm (78.7") long by setting the
scanner to the Long Document mode. Select [Standard] or [2000mm]
depending on the length of the document.
E
Click [OK] to close the scanner driver settings screen.
F
Pull out the document feed tray.
G
Pull out the Eject Stopper.
H
Pinch the Eject Stopper and slide it to detach.
I
Load the document.
horizontal
CAUTION
• When scanning long documents whose length are more than 228 mm (9.0"), place
one document at a time. Otherwise, it may damage the documents.
• When feeding the document, support it to keep the same height between the
document and the feed path. If the document is lower than the feed path, the
document may be torn. If the document is higher than the feed path, the scanned
image may be skewed.
• The lower edge of a thin long document may be damaged with feeding. Do not feed
the document fed many times or torn documents.
26