Advertisement
Input selection buttons — Press one of these buttons to select an input to switch to the output. The LED at
E
the right of each button lights when the corresponding input is selected. If auto-input switching is in effect, these
buttons are disabled, but the LEDs continue to light to indicate the selected input. The input buttons are also
used to initiate a system reset and to enable and disable front panel lockout (see the SW HD 4K PLUS Series
User Guide for more information).
© 2018 Extron Electronics — All rights reserved.
www.extron.com
All trademarks mentioned are the property of their respective owners.
68-2940-51 Rev. A
07 18
4
Advertisement
