Table of Contents
Advertisement
Troubleshooting
Phenomena that may be easy to be mistaken for machine defects (continued)
Phenomenon
The IR and
RS-232C does
not work on
HDBaseT
connection.
HDBaseT
connection
does not work.
LAN does not
work, if LAN is
connected to
the projector
while having
an input signal
from HDBaseT.
(continued on next page)
76
Cases not involving a machine defect
The SAVING function is working.
Select NORMAL for STANDBY MODE item in the
SETUP menu.
The SAVING function is working.
Select NORMAL for STANDBY MODE item in the
SETUP menu.
The connected equipment may not be supported by
HDBaseT.
Refer to User's manual(detailed) for connection.
This projector is compatible with 100BASE-T only.
Check the specification of the connected equipments.
If the LAN cable is connected with the hub, try to change
the connected port at the hub.
If the LAN cable is connected directly to the computer,
try to connect to other computer.
Reference
page
56
56
15
–
–
–
Advertisement
Table of Contents
