Dukane 9100WUSS User Manual page 32

Operating
Correcting the distortion (continued)
 PERFECT FIT:
When PERFECT FIT is pointed at, pressing the ► or ENTER button displays
the PERFECT FIT dialog.
This projector is equipped with a test pattern for PERFECT FIT. Select
PATTERN with the ▲/▼ buttons, then press the ◄/► buttons to switch on and
off.
1.
Select SETUP with the ▲/▼ buttons and press the ► or ENTER button.
2.
Select one of the corners or sides to be adjusted with the ▲/▼/◄/►
buttons and press the ENTER button.
3.
Adjust the selected part as below.
● For adjusting a corner, use the ▲/▼/◄/► buttons to adjust the position of
the corner.
● For adjusting the upper or lower side, use the ▲/▼ buttons to adjust the
distortion of the side.
● For adjusting the left or right side, use the ◄/► buttons to adjust the
distortion of the side.
● To adjust another corner or side, press the ENTER button and follow the
procedure from step 2.
(continued on next page)
32