Function Menu On Osd - Orion 9REDP Installation And User Manual

No Operation (Change to stand-by in case of inactivity)
The monitor can be adjusted so that it is automatically switched to stand-by mode when nobutton has been actuated for a
defined time. Select the duration or OFF (function deactivated) with the button ◄ or ►. One minute before going to
stand-by the time is counted down (indication Power Time Left). Switching over to stand-by can still be stopped if you
press one of the buttons to during the countdown.
Reset (Reset to the factory settings)
After activating the menu item with the button ►,after a few seconds all settings of the on-screen menu are reset to the
factory settings. After a reset the source HDMI is selected and the volume is adjusted to the value 50.

4-6 FUNCTION MENU on OSD

For the source PC only. If the automatic picture adjustment should not provide the desired result,
the picture can manually be adjusted via the menu items ofthis page.
H- Pos ition
V-Pos iti on
C lock
Phas e
H-Position (Horizontal position of the picture)
Move the picture to the left with the button ◄ or to the right with the button ►.
V-Position (Vertical position of the picture)
Move the picture downwards with the button ◄ or upwards with the button ►.
Clock (Pixel clock)
For fine adjustment of the picture width. if vertical lines appear in the picture, reduce (◄ ) or increase ( ►) the picture
width.
Phase
Adjust the phase with the button ◄ or ►so that a perfect sharpness (e. g. of the display of let-ters) is reached and
there is no horizontal interference.
FU NCTION
Installation and User's Guide
5 0
5 0
1 0 0
1 0 0
15