System Menu On Osd - Orion 9REDP Installation And User Manual

4-5 SYSTEM MENU on OSD

S YSTEM
Sl eep Ti mer
L a ngua g e
H-Posi t ion
V- P osition
D urat ion
Hal fton e
D PMS
N o Op er at ion
Res et
Sleep Timer (Timer-controlled change to stand-by)
Via this menu item a duration can be defined. After it has elapsed, the monitor will automatically go to stand -by mode.
Select the duration or OFF with the button ◄ or ►. One minute before changing to stand-by, the time is counted down
(display Sleep Time Left). It is not possible to call the on-screen menu, the source list and the volume scale during this
countdown.
Language (Menu language)
Select English, French, Spanish, Italian or German with the button ◄ or ►.
H-Position (Horizontal position of the menu)
Move the menu to the left with the button ◄ or to the right with the button ►.
V-Position (Vertical position of the menu)
Move the menu upwards with the button ◄ or downwards with the button ►.
Duration (Time of insertion)
This menu item defines the time the menu remains inserted after the last button has been pressed. The adjusted duration
also applies to the insertion of the source list and the volume scale. Reduce the duration with the button ◄ or increase it
with the button ►. (adjusting range 5– 60 seconds)
Halftone (Transparency of the menu)
Via this menu item the transparency of the menu and the source list and volume scale inserted can be adjusted. Increase
the transparency with the button ◄ or reduce it with the button ►.
DPMS (Power saving mode for the use as a computer monitor, not for the sources AV1, AV2, SVIDEO)
The function can be activated (ON) or deacti-vated (OFF) with the button ◄ or ►. If the graphics card of the computer
supports the VESA power saving standard DPMS (Display PowerManagement Signaling), it is possible to definethe time
in the computer adjustments after which, in case of inactivity, the system will senda signal to the monitor to go to the
power saving mode. If the monitor receives the corresponding signal from the computer, it goes to the power saving mode
after approx.
O FF
En gl is h
5 0
5 0
1 5
1 0 0
OF F
OF F
Installation and User's Guide
14