Advertisement
Quick Links
AT&T U-verse
Wi-Fi Gateway Replacement
For use with High
Speed Internet
and TV
Get started
These instructions will guide you through the process of replacing your AT&T U-verse Wi-Fi Gateway.
In the box:
Begin anytime!
You don't need to wait until the
Service Activation Date listed on your packing slip.
Total approximate installation time: 35 minutes
Wi-Fi Gateway
(Front View)
®
Power Cord
2 parts
(NVG589 to NVG599 without Voice Swap Guide)
11/14
self-
installation
guide
FPO
ATT100070695
ATT142770893-2
Advertisement
Related Manuals for AT&T U-verse NVG589
Summary of Contents for AT&T U-verse NVG589
-
Page 1: Get Started
self- AT&T U-verse ® installation guide Wi-Fi Gateway Replacement For use with High Speed Internet Begin anytime! You don’t need to wait until the and TV Service Activation Date listed on your packing slip. Get started Total approximate installation time: 35 minutes These instructions will guide you through the process of replacing your AT&T U-verse Wi-Fi Gateway. - Page 2 Set up Power up Approximate time: 10 minutes Approximate time: 1-15 minutes Your Wi-Fi Gateway is now powering up. During this time (up to 15 minutes), do not unplug the power cord or the green data cable, as this can permanently Please note that your U-verse TV and Internet services will not operate during this process.
- Page 3 Need more help? No TV or Internet service: Check your connections: Cables usually make an audible click when secure. Check Power: Power light on the Wi-Fi Gateway and the LED light on the power unit should Green be green; if not, try another electrical outlet Light Check Service light on front of the Wi-Fi Gateway: If after 15 minutes, the light is red or off, power down the Wi-Fi Gateway by holding down red reset button for 15 seconds.