Ii19 - Curtis TLP12A User Manual

INSTALLATION INSTRUCTIONS
Installation
Leveling
WARNING: Use the leveling legs to level the
brewer only. Do not use them to adjust brewer
height. Do not extend them higher than necessary.
1 Position the brewer on the counter top. Level it left to
right and front to back by turning the bottom of the
legs.
Connect the Water Supply
2 Flush the water supply line prior to installation to purge
3
the back of the brewer. Leave the water supply valve
closed until the power is connected.
Connect the Power Cord
WARNING: Connect the power cord to the
appropriate type and size electrical outlet. If the
electrical outlet is not compatible with the power
cord, have it upgraded by a licensed electrician. Do
not modify the power plug. Do not use an extension
cord. Do not use a power cord/plug that is damaged.
4 Connect the power cord to the appropriate electrical
outlet.
Power Up the Brewer
5 Turn on the water supply valve.
6 Make sure that the circuit breaker supplying power to
the electrical outlet is on.
7 Turn the toggle switch on the back of the brewer to the
TLP, INSTALLATION INSTRUCTIONS
continued...

II19

112917A