Curtis TLP12A User Manual page 13

PROGRAMMING GUIDE
Changing the Full Brew Volume (Factory Default: 74oz./2.2L)
WARNING: These steps involve working with hot water. Avoid splashing and spilling.
1 Turn the brewer on and wait for the BREW light to
come on solid.
2 Make sure the brew basket is empty and pushed
all the way in until it stops below the control
panel.
3 Turn off the control panel by pressing and
releasing the POWER button.
4 Press and hold the HALF BREW button. Press and release the POWER button.
5 Continue to hold down the HALF BREW button until the READY light
BREW button.
6
7
Changing the Half Brew Volume (Factory Default: 37oz./1.1L)
WARNING: These steps involve working with hot water. Avoid splashing and spilling.
1 Turn the brewer on and wait for the BREW light to
come on solid.
2 Make sure the brew basket is empty and pushed
all the way in until it stops below the control
panel.
3 Turn off the control panel by pressing and
releasing the POWER button.
4 Press and hold the HALF BREW button. Press and release the POWER button.
5 Continue to hold down the HALF BREW button until the READY light
BREW button.
6
7
POWER
, then release the HALF
POWER
, then release the HALF
PG10