6.3 GTX 3X5
This section contains parts, procedures, and requirements for assembly, removal, and reinstallation of
GTX 3X5 equipment installed under STC SA01714WI. After removal and reinstallation, the GTX 3X5
return to service procedures must be performed in accordance with section 9.
Connector, hi-dense, D-sub, mil crimp 62 ckt
Sub-assembly, backshell with hardware, 37/62 pin
Sub-assembly, ground adapter, shell 4&5
Screw, 4-40 x .250, FLHP 100, SS/P, nylon
Connector, hi-dense, D-sub, mil crimp, 15 ckt
Sub-assembly, backshell with hardware, 9/15 pin
Sub-assembly, ground adapter, shell 1-3
Refer to table 6-2 for the list of back plate items for the standard/G1000 mounting assembly. Refer to
figure 6-4 and figure 6-5 for the back plate assembly.
Table 6-2 Standard/G1000 Mount Back Plate Hardware
Item
1
DCP, connector plate, GTX 3X5, w/secondaries
2
Connector, male/female special, BNC
3
Washer, shoulder, GNC 400
4
Connector, male/female, special, BNC/TNC
5
Screw, 4-40 X .250, PHP, SS/P, nylon
190-00734-11
Rev. 6
Table 6-1 GTX 3X5 Connector Kit Hardware
Description
GTX 3X5
P3251
Figure 6-3 GTX 3X5 Connector Kits
Description
GTX 33X and GTX 3X5 ADS-B Maintenance Manual
P/N
330-00185-62
011-00950-03
011-01169-01
211-63234-06
2 ea connector
330-00185-15
011-00950-00
011-01169-00
GTX 345/345R Only
P3252
P/N
125-00307-10
330-00053-01
212-00022-00
330-00053-02
211-60234-08
Qty
1
1
1
1
1
1
Qty
1
1
2
1
4
Page 6-4