Use In Fault-Tolerant Systems - Siemens CP 443-5 Basic Manual

Performance Data
5.7

Use in Fault-tolerant Systems

With the CP 443-5 Basic, you can operate fault-tolerant S7 connections in an H
system.
You will find more detailed information about the possible operating and structural
options in the "SIMATIC S7-400H Programmable Controller Manual, Fault-tolerant
Systems".
If the CP 443-5 Basic is used in a fault-tolerant S7-400H system, the following
communications services can also be used on single (non-redundant) connections:
S S7 connection for PG functions and PG routing
S S5-compatible communication (SEND/RECEIVE interface) on FDL connections
S FMS connections
S Time-of-day distribution
Note
Please note the CPU types in Table 4-3
B3–18
www.gkbpx.com
CP 443-5 Basic for PROFIBUS / Manual Part B3 –
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
Release 11/2002
C79000-G8976-C161-03