For Silvercare™ Washing (Select Models - Samsung SilverCare SilverCare Washer Owner's Manual

Washing a Load of Laundry
FOR SILVERCARE™ WASHING (SELECT MODELS)
The SilverCare™ technology introduces pure silver ions to the wash and rinse water. They contribute to
the removal of greater than 99.9% (Note: percentage may be higher based on further analysis of NSF
tests) of bacteria (specified test bacteria in the U.S. EPA Test Guidelines DIS/TSS 13) even in cold water
cycles.
Microorganisms found in washing machines can cause odors. Some bacteria and other microorganisms
are able to remain in the washing machine despite the rigours of regular washing. In some cases these
remaining microorganisms can grow and multiply to form biofilm inside of the washing machine.
Samsung's SilverCare™ Technology helps to remove many bacteria and mold species from inside the
washer, the drum of the machine, and its internal parts.
Samsung's SilverCare™ Technology provides a 92% energy savings over hot water sanitization, but is as
effective in removing microorganisms from laundry. Extra delicate blouses, shirts, or even lingerie that
must washed in a cold or warm water wash can now be made as germ-free as clothes washed in the
sanitizing cycle.
1. Open the door, put in the clothes and close the door again.
2. Press the Power button.
3. Select a Cycle by turning the Cycle Selection dial.
4. Press SilverCare™ button.
5. Add detergent in the dispenser tray for main washing, and add fabric softener up to the marked
line.
: For Pre Wash, put a supplementary detergent in the dispenser.
If SilverCare™ is used with fabric softener, microorganism removal may be less effective.
6. Press Start/Pause button.
: Automatically selects optimal washing conditions by sensing the laundry's weight.
Note :
FOR HOME USE ONLY– COMMERCIAL USERS SHOULD NOTIFY THEIR LOCAL WASTE TREATMENT
AUTHORITIES BEFORE USE
You can find # of times you used SilverCare™ option by pushing signal and SilverCare™ button.
LU3 : less than 1000 times
LU2 : between 1000 to 2000 times
LU1 : between 2000 to 2999 times
LU0 : over 2999 times
You should replace the SilverCare™ kit when it displays "LU0". Contact 1-800-SAMSUNG.
Note :
For some model which has no heater if you choose SilverCare™, Temp will be fixed to Cold/Cold.
If you change Temp selection, the SilverCare™ option will be canceled.
You can't choose SilverCare™ option with Wool cycle.
C-5 SAMSUNG Clothes Washer Owner's Instructions