Sagem OT860RF User Manual page 42

Phone code
The Phone code menu allows you to activate the phone code so that it is requested and checked whenever the phone is
switched on if a different SIM card is used. This code is automatically linked to the SIM card installed when the phone is
activated, for example to protect the phone if stolen.
Select Activation and [Select].
Enter 0000 (the default factory code) and validate.
Select Off or On and validate.
To modify the phone code, select Modify and validate.
Enter old phone code and validate.
Enter new phone code and validate.
Enter phone code again to confirm it and validate.
Operator
This menu allows you to modify call barring.
Access to this service depends on your type of subscription.
Confidentiality
The Confidentiality function is sued to erase the last numbers called, the messages or diary events when a new SIM card is
inserted in the phone.
This menu lets you activate automatic deletion, after switch on/off, of the messages and/or calls stored in the phone.
Select On or Off and validate.
Fixed dialling
This menu allows you to restrict the outgoing calls.
The availability of this menu depends on your SIM.
Enter PIN2 number and validate.
Select Activate or Deactivate and validate.
Proceed as for any other phonebook.
When activating this function, only the numbers stored in the phonebook can be called.
This phonebook is linked to the SIM card, and its size depends on the card's capacity.
Cost
This menu lets you control call costs (*).
Via the Cost menu (*), you can consult the cost of the last communication and all communications made since the last
erase.
42
Settings