Sagem OT860RF User Manual page 37

- Delete all: lets you delete all your devices. WARNING: you need to restart the pairing when this function is used.
- Activate: used to activate the connection with the device.
- Deactivate: used to deactivate the connection with the device.
- Properties: used to display the device's list of Bluetooth
Notes:
- Refer to the user manual of the device with which you are pairing to find out how to set this device to the mode allowing
this operation.
- The code of the remote device may be predefined by the device manufacturer. In this case, refer to the user manual of this
device to find out this code.
Bluetooth name
This is the name used to identify your phone when it is detected by another Bluetooth
USB mode
This menu lets you select a mode for connecting the phone to a PC using a USB cable available as an accessory:
At Plugging-in
If you select this option, on connecting a USB cable the phone will prompt you to select the required mode.
Modem
This mode is a communication mode between the phone and a PC. It is used to exchange data (my card, contacts) between
the phone and a PC.
After connecting the USB cable between the phone and the PC, you must use the MPAS software (My Pictures And Sounds
available from www.planetsagem.com) or the Wellphone software (available from www.wellphone.com).
PictBridge
This mode lets you connect the phone to a printer (and print photos) without using a PC.
USB key
This mode is used to swap data between a PC and the phone's memory (the one containing the images, sounds and videos
files) or the card's memory.
After connecting the USB cable between the phone and the PC, the phone's memory and the card memory are considered
as additional memories in the Windows Explorer folder tree structure.
Note: If a call comes in during an exchange of data with your PC, the link will be interrupted and will have to be manually
re-started.
Notes when the phone is connected to a computer in USB key mode:
- The memory card is not detected by the phone. This means that if you have configured your phone with a wallpaper or
ringtone stored on the memory card, they will not be used during this connection.
- The camera is also not accessible, either in photo mode or video mode.
Settings
®
services.
®
device.
37