Resetting The Camera - Panasonic KX-HNC805C Installation Manual

Setup
Resetting the
camera
Use this procedure if you have
trouble setting up the camera.
1
Plug in the camera.
2
Using an object with a thin tip,
press and hold the reset
button on the back of the
camera for about 10 seconds,
then release the button when
the camera beeps.
R The camera's settings are
3
Wait for the camera's LED to
light in green.
Note:
R After resetting the camera, you
cannot use the camera again
until it is set up. Refer to the
relevant page in this section to
set up the camera.
24
HNC805C_(en_en)_0902_ver.110.pdf
reset.
For assistance, visit www.panasonic.ca/english/support
24 2016/09/05 13:39:11