Samsung SCH-u420 Series User Manual page 85

To look up information for a specific contact:
1. In standby mode, press and hold the
VoiceSignal.
"Say a Command" appears in the display and is
pronounced through the speaker.
2. Say "Lookup".
VoiceSignal prompts you to "Say the name."
3. Speak clearly and say the full name of the person you
want to call, exactly as it is entered in your contact list.
If VoiceSignal recognizes the name you said, the contact
information for that name appears in the display.
If VoiceSignal does not recognize the name you said, a choice
list of up to three names appears in the display, and
VoiceSignal prompts you with "Did you say?" followed by the
first name on the list.
4. Say "Yes" to confirm the name or "No" to hear the next
name, or use the keypad to select the correct name
from the list. (See "Choice Lists" on page 153, for more
information.)
To say the name again, press the Repeat (right) soft (
key.
To exit VoiceSignal without dialing, press the Settings (left)
soft (
5. The contact information for the name you selected
appears in the display.
Keypad Methods
Find by Name
If you have stored a named contact in your Contacts
list, Find lets you locate the entry quickly.
) key and press the Exit (right) soft (
Section 6: Understanding Your Contacts
Finding a Contacts Entry
key to launch
)
).
85