Samsung SCH-u420 Series User Manual page 153

Voice Command Tips:
•
Make sure you wait for the beep before speaking.
•
Speak clearly at a normal volume, as if you were talking on the
phone.
Voice-Activating Your Contacts List
When you first start VoiceSignal, it reads your Contacts
list and voice-activates all the names stored there.
When you have add or change contacts, VoiceSignal
automatically reloads and voice-activates the entire list.
Ending Calls Before Restarting the VoiceSignal Software
When you use VoiceSignal to make a call, you must end
that call before you can use VoiceSignal again.
Voice Settings
Choice Lists
VoiceSignal uses choice lists when it is not confident it
has correctly recognized a name or number. In this case,
it can display a list of up to three possible choices, and
prompt you to confirm the correct one.
You can change the way that VoiceSignal uses choice
lists with name dialing, digit dialing, and contacts. For
each feature, you can choose to always see a choice list
(even if there is only one choice), or never see a choice
list (even if there are multiple choices). If you leave the
setting at "Automatic," VoiceSignal displays a choice
list only when it is not confident it has correctly
recognized the name or number.
Voice Service
Section 12: Tools 153