Setting Up Garmin Express; Registering Your Device; Attaching The Carabiner Clip; Removing The Carabiner Clip - Garmin GPSMAP 64sc SiteSurvey Owner's Manual

• Software updates
• Data uploads to Garmin Connect
• Map, chart, or course updates

Setting Up Garmin Express

1 Connect the device to your computer using a USB
cable.
2 Go to www.garmin.com/express.
3 Follow the on-screen instructions.

Registering Your Device

Help us better support you by completing our online
registration today.
• Go to www.garmin.com/express.
• Keep the original sales receipt, or a photocopy, in a
safe place.

Attaching the Carabiner Clip

1 Position the carabiner clip
②
mounting spine of the device.
2 Slide the carabiner clip up until it locks in place.

Removing the Carabiner Clip

Lift up on the bottom of the carabiner clip, and slide
the carabiner clip off the mounting spine.

Attaching the Wrist Strap

1 Insert the loop of the wrist strap through the slot in
the device.
GPSMAP 64sc SiteSurvey
®
①
in the slots on the
2 Thread the other end of the strap through the loop,
and pull it tight.

Device Care

Avoid chemical cleaners, solvents, and insect repellents
that can damage plastic components and finishes.
Do not store the device where prolonged exposure to
extreme temperatures can occur, because it can cause
permanent damage.
The device is water resistant to IEC Standard 60529
IPX7. It can withstand accidental immersion in 1 meter
of water for 30 minutes. Prolonged submersion can
cause damage to the device. After submersion, be
certain to wipe dry and air dry the device before using
or charging.

Cleaning the Device

Even small amounts of sweat or moisture can cause
corrosion of the electrical contacts when connected to
a charger.
Corrosion can prevent charging and data transfer.
1 Wipe the device using a cloth dampened with a mild
detergent solution.
2 Wipe it dry.
After cleaning, allow the device to dry completely.

Data Management

NOTE: The device is not compatible with Windows 95,
98, Me, Windows NT , and Mac OS10.3andearlier.
®

File Types

The handheld device supports these file types.
• Files from BaseCamp or HomePort™. Go to
garmin.com/trip_planning.
• GPX track files.
• GPX geocache files. Go to
geocache.
• GGZ geocache files. Go to
geocache.
• JPEG photofiles.
• GPIcustom POI files from the Garmin POI Loader. Go
to www.garmin.com/products/poiloader.

Installing a Memory Card

Do not use a sharp object to remove user-replaceable
batteries.
You can install a microSD memory card in the handheld
device for additional storage or pre-loaded maps.
1 Turn the D-ring counter-clockwise, and pull up to
remove the cover.
NOTICE
NOTICE
www.
www.garmin.com/
www.garmin.com/
WARNING
17