Adding Names To The Translation Table - Samsung OfficeServ 7000 Series System Administration Manual

2. Dial the station number (e.g., 205) OR
press UP or DOWN key to select the
station and press the right soft key OR
press ANS/RLS to select all stations
and press the right soft key
3. Press UP or DOWN key to select the
station timer and press the right soft key
4. Enter the new value via the dial pad,
e.g., 0300 and the system will return
to step 2
5. Press TRSF to store and exit
programming OR press SPK to store
and advance to the next program
ADDING NAMES TO THE
TRANSLATION TABLE
This program allows the system administrator or technician to associate a CID or
ANI number received from the Central Office with a name programmed in this
translation table. If there is no match between a received number and a name in
this table, [no CID name] or [no ANI name] will be displayed.
The translation table consists of 1000 entries in the OfficeServ 500 M and
OfficeServ 7100, and OfficeServ 7200 and OfficeServ 7400 systems or 2000
entries in the OfficeServ 500 L system or 500 entries in the OfficeServ 100 sys-
tem with each entry comprised of a ten digit telephone number and a 16 digit
name. See Program Station Names.
Open customer programming and follow the instructions below.
PROGRAM KEYS
UP & DOWN - Used to scroll through options.
KEYPAD - Used to enter selections.
SOFT KEYS - Move cursor left and right.
SPK - Used to store data and advance to next MMC.
HOLD - Used to clear previous entry.
31
[205] NO ANS FWD
010 SEC
OR
[ALL] NO ANS FWD
010 SEC
[205] DTMF DUR.
0100 MS→
[205] DTMF DUR.
0100 MS→0300