Program Trunk Names - Samsung OfficeServ 7000 Series System Administration Manual

PROGRAM TRUNK NAMES

This program is used to assign a character name or identification for each C.O. line.
You may assign a name of 11 characters long.
PROGRAM KEYS
UP & DOWN - Used to scroll and move cursor.
KEYPAD - Used to enter characters.
HOLD - Press to clear entry.
Open customer programming and follow the instructions below.
ACTION
1. Press TRSF and then dial 404
Display shows
2. Dial trunk (e.g., 704) OR press UP or
DOWN to select trunk and press the right
soft key to move the cursor
3. Enter the trunk name using the procedure
in Program Station Names and press the
right soft key to return to step 2
4. Press TRSF to store and exit programming
OR press SPK to store and advance to
the next program
DISPLAY
[701] TRUNK NAME
[704] TRUNK NAME
[704] TRUNK NAME
SAMSUNG
16