Samsung OfficeServ 7000 Series System Administration Manual page 36

PROGRAM KEYS
UP & DOWN - Select the extension number.
KEYPAD - Used to enter extender codes.
HOLD - Used to clear the displayed data.
Open customer programming and follow the instructions below.
ACTION
1. Press TRSF and then dial 107
Display shows the first station
2. Dial the station number (e.g., 205) OR use
UP or DOWN to scroll through the station
numbers and press the right soft key to
move the cursor
3. Enter the key number (e.g., 18) OR use
UP and DOWN to scroll through the keys
and use the right soft key to move the
cursor OR press the key to be programmed
4. Dial the extender according to the list
above and the system will display your
selection
If there are no more entries, press
the left soft key to return to step 2
5. Press TRSF to store and exit programming
OR press SPK to store and advance to the
next program
DISPLAY
[201] KEY EXTEND
01:CALL1
[205] KEY EXTEND
01:CALL1
[205] KEY EXTEND
18:DS
[205] KEY EXTEND
18:DS207
28