Reset Station Passcodes To Default - Samsung OfficeServ 7000 Series System Administration Manual

Failure to enter the time using the 24 hour clock will cause the date to change at
12:00 P.M. Open customer programming and follow the instructions below.
ACTION
1. Press TRSF and then dial 505
Display shows
2. Enter the new time and date using
the above format
3. Verify the time and date and reenter
them if necessary
4. Press TRSF to store and exit
programming OR press SPK to store
and advance to the next program
If you have entered invalid data, you will receive an [ INVALID ENTRY ] message for
three seconds. Reenter the correct date and time. If the information you entered is
incorrect, repeat the procedure.
RESET STATION PASSCODES
TO DEFAULT
Individual keyset users can set or change their own individual passcodes. These
passcodes are used to lock and unlock keysets, override toll restriction and access
the DISA feature. At times, it may be necessary for the system administrator to
reset a station's passcode to default "1234."This program cannot be used to display
passcodes, only to reset them.
PROGRAM KEYS
UP & DOWN - Select the extension number.
HOLD - Press to reset the passcode.
Open customer programming and follow the instructions below.
ACTION
1. Press TRSF and then dial 101
Display shows
DISPLAY
OLD:6010184:0047
NEW:WMMDDYY:HHMM
OLD:6010184:0047
NEW:3020994:1445
OLD:3020994:1445
NEW:WMMDDYY:HHMM
DISPLAY
[201] PASSCODE
PASSCODE:,,,,
12