NOTE
When the OS of the device is updated, the pairing information may be deleted. If this
•
happens, reprogramme the pairing information to the Bluetooth
If you pair your phone which has already been paired to your vehicle more than once in
•
the past, you need to delete "Mazda" on your mobile device. Then, execute the
®
Bluetooth
search on your mobile device once again, and pair to a newly detected
"Mazda".
Before you pair your device, make sure that Bluetooth
•
on the vehicle.
®
If Bluetooth
-enabled devices are used in the following locations or conditions,
•
connection via Bluetooth
The device is in a location hidden from the unit such as behind or under a seat, or
•
inside the glove compartment.
The device contacts or is covered by a metal object or body.
•
The device is set to power-saving mode.
•
Different Bluetooth
•
®
Bluetooth
audio. For example, device A can be connected as a Bluetooth
device and device B can be connected as a Bluetooth
following may occur when they are used at the same time.
®
The Bluetooth
•
Noise occurs in the Hands-Free audio.
•
Hands-Free operates slowly.
•
®
may not be possible.
®
-enabled devices can be used for Bluetooth
connection of the device is disconnected.
•
•
•
•
•
•
®
unit.
®
is "ON", both on your phone and
®
Hands-Free and
®
audio device. However, the
®
Hands-Free