Tcp/Ip Configuration; Lan-To-Lan Application - NETGEAR RM356 - Router - EN Reference Manual

This chapter describes how to configure your Model RM356 Modem Router for TCP/IP.
Depending on your particular applications, you must configure different menus. For instance,
Internet access is the most common application of TCP/IP. For this application, you should
configure Menu 4. Configurations for other applications are provided in the following sections.

LAN-to-LAN Application

An example of a typical LAN-to-LAN application is to use the router to call from a branch office
to the headquarters, as shown in
Branch office
Model RM356
router
56 kbps
Modem Router
PWR TEST
Remote Access
Figure 7-1. LAN-to-LAN Application
For the branch office, you must configure a remote node in order to dial out to the headquarters.
Additionally, you may also need to configure static routes if some services reside beyond the
immediate remote LAN.

TCP/IP Configuration

Figure 7-1.
RM356
MODEL
LAN MODEM
COL 1 2 3 4 OH CD TD RD
TCP/IP Configuration
Model RM356
router
RM356
MODEL
56 kbps LAN MODEM
Modem Router
PWR TEST COL 1 2 3 4 OH CD TD RD
Remote Access
Chapter 7
Corporate
headquarters
8697EA
7-1