Packet Trace Display Format - NETGEAR RM356 - Router - EN Reference Manual

Reference Guide for the Model RM356 Modem Router

Packet Trace Display Format

Data packets are time stamped and displayed up to the first 32 bytes. PPP message packets are
summarized, but their contents are not displayed. The format of the packet trace display is shown
in the following packet example:
125 fe405c 0 PNET ebp=4ad00,seqNum=27 PPP1-RECV:24 len:26
Figure 10-1 breaks down and defines the packet trace display for the preceding packet example.
125 fe405c 0 PNET
0000: ff 03 c0 21
0000: 00 2d 0f 01
Figure 10-1. Packet Trace Display Definitions
The following is an example of the PPP message format:
113 fe4002 195 PNET ppp CHAP login to remote OK!
Figure 10-2 breaks down and defines the PPP message format for the preceding packet example.
113 fe4002 195 PNET
Figure 10-2. PPP Message Definitions
10-8
ebp=4ad00, seqNum=27 PPP1-RECV:24
08 33 00 16 80 21
03 06 cc f7 cb b7
ppp CHAP login to remote OK!
len:26
01 12 00 10 02 06
packet number
timestamp (unit ms)
process ID
packet type
LAN-XMIT, LAN-RECV
PP1-XMIT, PP1-RECV
PP2-XMIT, PP2-RECV
length
packet data
8439EA
packet number
timestamp (unit ms)
process ID
type: ppp
message
8440EA
Troubleshooting