Advertisement
Setting up Xerox
®
v) Driver Preset can make an operator's life very easy once configured.
Launching the UI, they select the required preset and all of the saved
scan parameters are loaded automatically.
vi) Once all of the required parameters/settings are set, click on the
arrow next to the Presets drop-down list.
vii) Select 'Save As....' And the following will appear. Enter your pre-
ferred name for the Preset and click 'OK'
viii) The saved preset will be displayed in the drop-list and can be
selected by the operator every time the UI is launched.
©2018 Xerox Corporation. All rights reserved. Xerox®, Xerox and Design®, DocuMate® and FreeFlow
Makeready® are trademarks of Xerox Corporation in the United States and/or other countries. Microsoft®,
Windows Vista®, Windows®, the Windows logo and XP® are trademarks of Microsoft Corporation in the
United States and/or other countries. TWAIN™ is a trademark of TWAIN Working Group. Universal Serial Bus is
a trademark of USB Implementers Forum, Inc. (USB-IF). All other trademarks are the property of their respective
owners and are hereby acknowledged. Prices, features, specifications, capabilities, appearance and availability
of Xerox products and services are subject to change without notice. 09/18 BR6965
DocuMate
Scanners and Xerox
®
FreeFlow MakeReady
®
ix) Another feature is that you can choose a preset to be loaded by
default when the UI is launched. This can be set for each individual
scanner when
not
in 'Combo' mode, otherwise it will be applied to
both when in 'Combo' mode.
This is set in the device's Hardware properties page
Click on the 'Driver Settings' tab. From the drop-down, select your
preferred 'Default preset'. Click 'OK' to save & exit.
®
(See Section 3.
ii).
Advertisement
