For Windows 2000/Xp - Belkin F5D7230-4 User Manual

Wireless Broadband Router User Manual
Check/Renew IP Address under Windows 98/ME
The following steps help you to verify if your network adapter gets
an IP address within the DHCP IP pool range (192.168.2.2 ~
192.168.2.100 by default) of the router. If not, you may need to
renew the IP information.
Step 1
Step 2
Step 3

For Windows 2000/XP

Step 1
Step 2
Step 3
Step 4
Step 5
12
From the Start menu, click Run to open the Run dialog
box.
Enter winipcfg in the dialog box and then click OK.
Select the Ethernet or WLAN adapter from the drop-down
list to show the IP address. If necessary, click Release
and then Renew to get a new IP address.
Click on the Start menu, point to Settings and click on
Control Panel.
Double-click the Network and Dial-up Connections or
Network Connections icon.
Right-click the Local Area Connection icon for your NIC
or wireless adapter and then click Properties.
On the General tab, highlight Internet Protocol (TCP/IP)
and then click Properties.
Choose one of the methods as required: