Guide To The Network Icon; Entering Characters - Epson M2050 Series User Manual

Guide to the Control Panel
Select the paper size and paper type you loaded in the paper source.
Displays menus that allow you to set up the printer for use on a wireless network.

Guide to the Network Icon

Entering Characters

To enter characters and symbols for network settings from the control panel, use the
the software keyboard on the LCD screen. Press the
on the keyboard, and then press the OK button. When you have finished entering characters, select OK, and then
press the OK button.
>
Entering Characters
The printer is not connected to a wired (Ethernet) network or a wireless (Wi-Fi)
network.
The printer is connected to a wired (Ethernet) network.
The printer is searching for SSID, unset IP address, or having a problem with a wireless
(Wi-Fi) network.
The printer is connected to a wireless (Wi-Fi) network.
The number of bars indicates the signal strength of the connection. The more bars
there are, the stronger the connection.
The printer is not connected to a wireless (Wi-Fi) network in Wi-Fi Direct (Simple AP)
mode.
The printer is connected to a wireless (Wi-Fi) network in Wi-Fi Direct (Simple AP) mode.
u d l
, ,
23
u
r
, or button to select a character or function button
d l r
, , , and buttons and