Installing The Water Dispenser Line - Samsung DA68-01890Q User Manual

se setting up your side-by-side refrigerator g up you s de by s de e ge a o

INSTALLING THE WATER DISPENSER LINE

Connecting the water line to the Refrigerator.
There are several items that you need to purchase to complete this connection.
You may find these items sold as a kit at your local hardware store.
• 1/4" compression nut
• copper tubing
1. Slip the compression nut
2. Tighten the compression nut
- If you are using copper tubing, slip the compression nut
on copper tubing (not included) as shown.
- If you are using plastic tubing
compression fitting.
Do not use without the molded end(Bulb) of the plastic tubing
CAUTION
3. Tighten the compression nut
4. Turn water on and check for any leakage.
Only connect the water line to a drinkable water source.
If you have to repair or disassemble the water line, cut off 1/4" of the plastic tubing to make sure
you get a snug, leak-free connection.
When using power cord
To prevent power cord damage, after product installation, arrange
the remaining power cord to the unit cover and fix.
20_ setting up
• plastic tubing
through the supplied plastic tubing
onto the 1/4" compression fitting.
, insert the molded end(Bulb) of the plastic tubing
onto the compression fitting. Do not over-tighten the compression nut
Refrigerator
Plastic tubing
(Supplied)
Ferrule
(Not supplied)
Copper tubing or Plastic tubing
(Not supplied) (Not supplied)
Household water line
.
(not included) and ferrule (not included)
.
Compression nut
(1/4") (Supplied)
Compression fitting
(Supplied)
Bulb
Compression nut
(1/4") (Not supplied)
tic
s
into the
.