The Peel-Off; Using Fan Fold Paper - BIXOLON SRP-770II User Manual

11. The Peel-off

This function is used to separate label from liner automatically.
CAUTIONS:
1) Peeler is for Label Paper only.
2) When the peeler switch is on, label is not printed before when
the previous printed label is taken off from the peeler.
3) When the peeler function is not used set peeler switch off.
With this switch on printer may not work correctly.
1. Open the peel-off cover and turn on peeler switch.
(Check if Peeler LED is on.)
2. Remove the paper and
insert the paper through slot.
remove
4. Turn off and on the printer.
3. Adjust the paper guides and close the cover.

12. Using Fan Fold Paper

Insert paper through both the rear slot and guides.
Adjust holders and guides to the width of the paper.
Open the Dust Cover
and Insert paper
Adjust holders papers and paper Fixed
Paper Fixed
Dust Cover
Adjust Guides