Table of Contents
Advertisement
01-Setup
5/10/99 4:28 PM
12
Setting Up Your Printer
Page 12
Installing Printer Driver
System Requirement
Before you start, make sure you have the following computer setup.
(These are the minimum requirements.)
¥ IBM or compatible with a 386 or higher processor
¥ Windows 95, Windows 98, Windows 3.1x, or Windows NT
¥ 4 MB of available hard disk space
¥ 4 MB of RAM
¥ Centronics-compatible parallel cable (IEEE 1284-compliant)
Windows 95/98/NT4.0 Installation
1. Turn on the computer and start Windows.
If Windows 95/98 recognizes the new printer, go to the section
ÒWindows 95/98 Plug and PlayÓ on page 13.
2. Insert the setup CD-ROM into your CD-ROM drive.
If Windows does not automatically run the CD-ROM, go to the
section ÒIf Windows Does Not Run the CD-ROMÓ on page 13.
3. Click the language you want.
Advertisement
Table of Contents
