Changing The Display Language; Using The Toner Save Mode; Using The Control Panel Button; Using The Control Panel Menu - Samsung ML 3560 User Manual

Changing the Display Language

To change the language that is displayed on the control panel,
follow these steps:
1
In ready mode, press the Menu button (
control panel until you see "Setup" on the bottom line of
the display.
2
Press the Enter button (
3
Press the scroll button (
Language" on the bottom line.
4
Press the Enter button (
5
Press the scroll button (
you want to use.
6
Press the Enter button (
7
Press the On Line/Continue button (
ready mode.

Using the Toner Save Mode

The Toner Save mode allows the printer to use less toner on
each page. Activating this mode extends the life of your toner
cartridge and reduces your cost per page beyond what one
would experience in the normal mode, but it reduces print
quality. This setting is not available with the 1200 dpi setting.
There are three ways to enable the Toner Save mode:

Using the Control Panel Button

Press the Toner Save button (
printer must be in ready mode; the On Line/Continue button
( ) is on in green and "Ready" is shown on the display.
• If the Toner Save button backlight is on, the mode is
enabled and the printer uses less toner to print a page.
• If the Toner Save button backlight is off, the mode is
disabled and the printer prints in normal mode.

Using the Control Panel Menu

You can set the Toner Save item in the Graphics menu to turn
the Toner Save mode on or off.
For further details about using the control panel menu, see
page 3.2.
) on the
) to access the menu.
or ) until you see "LCD
) to confirm the menu item.
or ) to display the language
) to save the selection.
) to return to
) on the control panel. The
Setting Up Your Printer

From the Software Application

You can set the Toner Save mode from the printer properties
window on your printer driver. For details, see the Software
Section.

Installing Printer Software

You must install software using the supplied Printer
Drive CD after you have set up your printer and
connected it to your computer. For details, see the
Software Section
The Printer Drive CD provides you with the following software:
If you are printing from Windows
You can install the following printer software using the Printer
Drive CD.
• PCL printer driver for Windows. Use this driver to take
full advantage of your printer's features. See the
Software Section for details about installing the
Samsung PCL printer driver.
• PostScript Printer Description (PPD) file for Windows
to allow installation of the PostScript driver.
To install the PostScript driver, you need to select Custom
and put a check mark on the PostScript driver when you
install the software. For details, see the Software
Section.
• Smart Panel. Appears when printing errors occur. See the
Software Section for details about installing the Smart
Panel program.
If you are printing in Linux
You can print from a Linux-based computer with your printer.
Go to the Software Section for information about installing
the Linux driver and printing from a Linux environment.
If you are printing from a Macintosh
You can print from a Macintosh with your printer. Go to the
Software Section for information about installing the print
software and printing from a Macintosh.
2.8
.