Installing Printer Options; Precaution When Installing Printer Options; Installing Memory Dimm - Samsung ML 3560 User Manual

9
Installing Printer
Options
Your printer is a full-featured laser printer that has been
optimized to meet most of your printing needs. Recognizing
that each user may have different requirements, however,
Samsung makes several options available to enhance the
printer's capabilities.
This chapter includes:

• Precaution When Installing Printer Options

• Installing Memory DIMM

• Installing a Network Card
• Using the Hard Disk
• Installing an Optional Tray 2
• Installing a Duplex Unit
Precaution When Installing
Printer Options
DISCONNECT THE POWER CORD:
Never remove the printer control board while the printer is
plugged in.
To avoid the possibility of an electrical shock, always disconnect
the power cord when installing or removing ANY internal or
external printer option.
DISCHARGE STATIC ELECTRICITY:
The control board and internal printer options (Memory DIMM,
Network Card and Hard Disk) are sensitive to static electricity.
Before installing or removing an internal option, discharge
static electricity from your body by touching something metal,
such as the metal back plate on any device plugged into a
grounded power source. If you walk round before finishing
installation, discharge any static electricity once again.
Installing Memory DIMM
Your printer has a dual in-line memory module (DIMM) slot. Use
this DIMM slot to install more memory for the printer.
N
OTE
expanded to 288 MB. Use only the Samsung-approved DIMM.
Contact your Samsung dealer.
1
2
9.1

Installing Printer Options

: Your printer has 32 MB of memory which can be
Turn the printer power off and unplug all cables from the
printer.
Remove the duplex-slot cover from the back of the printer.
If you installed an optional duplex unit, remove it from the
printer.